ChamSys GeNetix GN2
(ChamSys GENETIXGN2)
2-Port Ethernet DMX Node
The ChamSys GeNetix GN2 is a compact, two-port Ethernet-to-DMX node designed for distributing and managing DMX lighting data across professional lighting networks. Supporting Art-Net, sACN, and Remote Device Management (RDM), it provides two configurable DMX ports that can operate as inputs or outputs. With PoE or USB-C power, an integrated display, remote web-based configuration, and MagicQ PC Core Mode unlocking, the GN2 is a flexible solution for live entertainment, touring productions, theaters, houses of worship, and permanent lighting installations.
ChamSys GeNetix GN2 Competitive Differences
- Two RDM-enabled DMX ports independently configurable for input, output, or DMX Fallback operation
- Supports Art-Net versions 1, 2, 3, and 4, along with sACN and ChamNet protocols
- Unlocks MagicQ PC software into Core Mode through either USB-C or network connectivity
- Built-in display and rotary encoder provide direct configuration without requiring a computer
- Integrated web server enables remote configuration through a network-connected browser
- Dual power options support Power over Ethernet (PoE) or USB-C for flexible installation
- DMX Fallback provides redundant data paths to help maintain fixture control in the event of a cable failure
- Configurable DMX merging supports HTP, LTP, highest IP address, and lowest IP address priority methods
- Stores up to 10 user scenes that can be recalled directly or through compatible lighting control systems
- Compact enclosure supports standalone placement, DIN rail installation, or truss mounting using its M12 receiver
ChamSys GeNetix GN2 Description
The ChamSys GeNetix GN2 provides reliable Ethernet-to-DMX conversion and network data distribution for professional lighting systems. Its two RDM-enabled DMX ports support both input and output operation, allowing the device to convert Art-Net or sACN data into DMX signals or receive DMX data for network distribution. Compatible with lighting consoles that support industry-standard Art-Net and sACN protocols, the GN2 can be integrated into a variety of lighting systems. Configurable DMX timing parameters, including refresh rate, break time, frame time, and mark-after-break, provide additional control over DMX communication.
Designed for straightforward setup and operation, the GN2 includes an onboard display and encoder for local configuration, an integrated web server for remote management, and configuration support through compatible ChamSys MagicQ and QuickQ consoles. A front-panel PIN lock helps prevent unauthorized changes to device settings. The GN2 also functions as a USB interface for MagicQ PC systems, unlocking MagicQ Core Mode when connected through USB-C or a network connection. This enables additional software functions, including scheduled events, remote control, automatic playback startup, and full-screen operation.
Advanced data-management features make the GN2 useful for installations where dependable lighting control is essential. DMX Fallback allows fixtures on a single universe to be connected in a loop for redundancy, helping maintain DMX communication if one cable in the loop becomes disconnected or damaged. Configurable merging options include Highest Takes Precedence (HTP), Latest Takes Precedence (LTP), and IP address-based source selection. The node also supports storage of up to 10 scenes captured from incoming Art-Net or sACN data, with scene playback available from the front panel, integrated web server, or compatible consoles. Configurable behavior for lost network data allows the device to hold the last DMX values, stop DMX output, or output zero values.
For expanded system integration, the GN2 supports synchronized DMX output through ChamNet when used with MagicQ consoles, helping reduce visual tearing across lighting fixtures. Power can be supplied through its PoE-enabled Ethernet connection or USB-C port, reducing the need for separate power supplies in supported installations. The compact housing measures 4.92 x 5.23 x 1.73 inches and weighs approximately 1.87 pounds, making it suitable for placement near lighting fixtures, mounting inside equipment enclosures, or installation directly in a truss system. An included DIN rail mounting clip, USB-A to USB-C cable, and mounting screws provide additional installation flexibility.
GeNetix GN2 Features
- Compact two-port Ethernet-to-DMX lighting network node
- Compatible with Art-Net and sACN lighting control systems
- Supports Art-Net versions 1, 2, 3, and 4
- Supports sACN with per-universe priority management
- Supports Remote Device Management (RDM)
- Supports ChamNet communication for compatible ChamSys systems
- Two independently configurable DMX input/output ports
- DMX Fallback functionality for redundant DMX connections
- DMX Fallback supported within one node or between compatible GeNetix nodes
- Configurable DMX refresh rate, break time, frame time, and mark-after-break
- DMX merging selectable individually for each port
- HTP merging uses the highest received channel value
- LTP merging uses the latest changed channel value, supporting up to two sources
- Highest IP address merging allows priority selection based on source IP address
- Lowest IP address merging allows priority selection based on source IP address
- Stores up to 10 user scenes captured from Art-Net or sACN data
- Scene recall through the onboard front panel
- Scene recall through the integrated web server
- Scene playback control from compatible MagicQ and QuickQ consoles
- Built-in display and rotary encoder for local configuration
- Integrated web server for remote device management
- Remote configuration from compatible MagicQ and QuickQ consoles
- Configurable front-panel PIN lock
- Unlocks MagicQ PC Core Mode through USB-C or network connection
- Functions as a USB DMX interface for MagicQ PC systems
- Supports configurable network data-loss behavior
- Hold mode maintains the last transmitted DMX values
- None mode stops DMX output when network data is lost
- Zeroes mode outputs zero values on all DMX channels
- Synchronized DMX output through ChamNet with compatible MagicQ consoles
- One Ethernet network port with Power over Ethernet support
- USB-C port for power and data connectivity
- Supports PoE or USB-C power operation
- Integrated Kensington security lock fixing
- M12 receiver for compatible truss mounting
- DIN rail mounting support
- Compact design for touring, stage, and fixed installations
- Includes DIN rail mounting clip and USB-A to USB-C cable
GeNetix GN2 Specifications
- Product Type: Ethernet-to-DMX Network Node
- Brand: ChamSys
- Model: GeNetix GN2
- DMX Ports: 2
- DMX Port Functions: Input, Output, or Fallback
- RDM Support: Yes
- Ethernet Network Ports: 1
- Network Protocols: Art-Net, sACN, ChamNet
- Art-Net Versions: 1, 2, 3, and 4
- DMX Timing Configuration: Refresh Rate, Break Time, Frame Time, Mark-After-Break
- DMX Merging Modes: None, HTP, LTP, Highest IP Address, Lowest IP Address
- LTP Merge Sources: Maximum 2
- DMX Redundancy: DMX Fallback Supported
- DMX Synchronization: Supported via ChamNet with MagicQ
- Lost Data Modes: Hold, None, Zeroes
- User Scene Storage: 10 Scenes
- Local Configuration: Built-In Display and Rotary Encoder
- Remote Configuration: Integrated Web Server
- Console Configuration: MagicQ and QuickQ
- Configuration Security: Front-Panel PIN Lock
- MagicQ PC Unlock: Core Mode via USB or Network
- USB Ports: 1 x USB-C
- Power Options: PoE or USB-C
- PoE Input: Supported on Ethernet Port
- PoE Power Rating: 42.5-57V DC, 7W Maximum
- USB Power Rating: 5V DC, 500mA
- Kensington Security Lock Fixing: Yes
- Truss Mounting: M12 Receiver
- DIN Rail Mounting: Supported, Clip Included
- Width: 4.92 in (125 mm)
- Depth: 5.23 in (133 mm)
- Height: 1.73 in (44 mm)
- Weight: 1.87 lb (0.85 kg)
What's In The Box
- (1) ChamSys GeNetix GN2 Ethernet DMX Node
- (1) DIN Rail Mount Clip
- (1) USB-A to USB-C Cable
- (3) Mounting Screws
- (1) Quick Start Guide
