Electro-Voice U60:1M
(Electro-Voice U60-1M)
Compact Mixer Amplifier
Dynacord U60:1M is a 60W mixer amplifier designed for small to medium-sized installed sound systems that need reliable background music and clear voice announcements. Its compact half-rack, 1 RU design, flexible input section, and support for both low-impedance and distributed speaker systems make it a practical choice for commercial audio applications.
Dynacord U60:1M Competitive Differences
- 60W output power with support for 4 ohm, 8 ohm, 70V, and 100V speaker systems
- Four-input design with two mic/line inputs and two stereo aux inputs summed to mono
- Switchable 48V phantom power for condenser microphones on both mic inputs
- Voice-over ducking automatically lowers background music for clearer announcements
- Emergency input and contact override help prioritize critical messages
- Compact half-rack, 1 RU enclosure with tabletop and bracket hardware included
Dynacord U60:1M Description
The Dynacord U60:1M is built for background music and paging applications in bars, restaurants, retail outlets, educational facilities, houses of worship, museums, galleries, transport hubs, and conference centers. Its 60W output stage can drive low-impedance 4 ohm or 8 ohm systems as well as 70V and 100V distributed audio systems.
Four inputs provide the flexibility needed for common commercial audio systems. Input 1 supports mic/line operation with contact override and a two-tone chime, Input 2 supports mic/line operation with VOX ducking, and Inputs 3 and 4 provide RCA aux inputs for music sources. Switchable 48V phantom power is available for condenser microphones.
Designed for dependable installation use, the U60:1M uses Class-D amplification for efficient performance and includes protection against overload, short circuit, high temperature, DC, HF, and over-current conditions. Its fanless convection cooling design helps keep operation quiet in noise-sensitive spaces.
The compact enclosure supports multiple mounting options, including standalone, tabletop, undertable, half-rack, full rack, and side-by-side rack configurations. Front-panel controls and status LEDs make setup and daily operation simple, while bass, treble, and high-pass filter options help tailor the system to the room.
U60:1M Features
- 60W mixer amplifier for installed audio systems
- Designed for small to medium-sized installations
- Ideal for background music and voice announcement applications
- Four total inputs: two mic/line inputs and two aux inputs
- Input 1 includes contact override with two-tone chime
- Input 2 includes VOX ducking for voice priority
- Switchable 48V phantom power for both mic inputs
- Emergency input with line and 100V support
- Supports 4 ohm, 8 ohm, 70V, and 100V speaker systems
- Class-D output stage topology
- Selectable 120 Hz high-pass filter
- Permanent 70 Hz low-cut filter
- Bass and treble adjustment controls
- Remote power on/off standby via contact closure
- Front-panel controls for output gain, input gain, bass, and treble
- Front status LEDs for protection, peak, signal, call, and power
- Fanless convection cooling
- Compact half-rack, 1 RU enclosure
- Tabletop and bracket hardware included
- Multiple mounting options including rack, side-by-side rack, tabletop, and undertable installation
U60:1M Specifications
- Rated Output Power: 60W
- Output Stage Topology: Class-D
- Speaker Outputs: 4 ohm, 8 ohm, 70V, 100V
- Number of Inputs: 2 mic/line, 2 aux, plus emergency input
- Input 1 Type: Mic/line with contact override and chime
- Input 1 Connector: 3-pin XLR balanced and 5-pin Eurostyle balanced/trigger
- Input 2 Type: Mic/line with VOX ducker override
- Input 2 Connector: 3-pin XLR balanced
- Input 3 Type: Line, RCA stereo summed to mono, unbalanced
- Input 4 Type: Line, RCA stereo summed to mono, unbalanced
- Emergency Input Type: Line and 100V
- Emergency Input Connector: 2-pin balanced
- Phantom Power: 48V DC, switchable
- VOX Ducking: 0 dB to -45 dB
- VOX Threshold: -60 dBu to +8 dBu, adjustable
- Frequency Response: 70 Hz to 22 kHz, any input to output, -3 dB ref. 1 kHz
- Line Output Frequency Response: <10 Hz to 65 kHz, any input to line output
- Distortion: <1% at rated output power, 1 kHz
- Bass Shelving: ±12 dB / 150 Hz, -3 dB at 100 Hz
- Treble Shelving: ±12 dB / 5 kHz, -3 dB at 10 kHz
- Permanent Low-Cut Filter: 70 Hz, 12 dB/octave
- Switchable Low-Cut Filter: 120 Hz, 12 dB/octave
- Mains Power Supply: 100 to 240 VAC, 50/60 Hz
- Power Rating: 100 VA
- Standby Consumption: 0.60W with remote off active
- Idle Consumption: 6W
- Remote Power: 2-pin Eurostyle contact closure
- Loudspeaker Output Connector: 4-pin Eurostyle
- Maximum Output Voltage: 16 VRMS at 4 ohm, 22 VRMS at 8 ohm, 85 VRMS at 70V, 115 VRMS at 100V
- Front Status LEDs: Protect, Peak, Signal, Call, Power
- Amplifier Protection: Audio limiters, high temperature, DC, HF, short circuit, and over-current protection
- Power Supply Protection: Mains over/under voltage, inrush current limiter, mains over-current, and high temperature protection
- Cooling: Fanless convection cooling
- Dimensions: 1.74 x 8.6 x 8.57 in (44.2 x 218 x 217.7 mm)
- Net Weight Without Accessories: 5.57 lb (2.53 kg)
- Net Weight With Accessories: 6.59 lb (2.99 kg)
- Shipping Weight: 7.38 lb (3.35 kg)
- Color: RAL 9017 Traffic Black
- IEC Protection Class: Class I, grounded
- Operating Temperature: 23°F to 113°F (-5°C to 45°C)
- Storage Temperature: -40°F to 158°F (-40°C to 70°C)
- Mounting: Standalone, 19-inch rack, rack side-by-side, half 19-inch rack, tabletop, undertable
What's In The Box
- Dynacord U60:1M mixer amplifier
- Tabletop hardware
- Mounting bracket hardware
