JTS NXB-5M | Drum Mic Kit

JTS Professional NXB5m  (JTS Drum mic kit)

5 piece professional drum microphone kit

Includes:
(1) NX-2 kick drum microphone
(4) CX-505 clamp on condenser microphones for toms and snare
Rugged carry case

The JTS NXB-5M Pro Series drum kit is perfect for any working drummer or sound engineer.

The NX-2 is born for solving the problem in low frequency sound faced by most microphones. The specially designed frequency response provides excellent output of low end punch on a kick drum. Accurate pick-up pattern ensures the best gain-before-feedback and isolation from other sound sources on or off stage. The NX-2 is optimal for kick drum and other bass instruments.

■ Type: Moving Coil Dynamic
■ Frequency Response: 20 to 12,000Hz
■ Polar Pattern: Supercardioid,rotationally symmetrical  about microphone axis, uniform with frequency  (see Figure 2)
■ Output Level (at 1,000Hz): Open circuit voltage: -85dB*(0.056mV)*0dB=1V/μbar
■ Impedance: Rated impedance is 600Ω for connection to microphone inputs rated low Z
■ Phasing: Positive pressure on diaphragm produces  positive voltage on pin 2 with respect to pin 3
■ Connector: Three-pin professional audio connector (male XLR type)
■ Case: Metallic enamel-painted die cast metal with hardened, Matte-finished steel grille
■ Adjustable Locking Mount: Integral, dynamic locking, adjustable through 180°
■ Net Weight: 815 grams (28.75 oz)

CX-505
With a smooth uniform frequency response CX-505 is optimal for drum and percussion instruments. A miniature profile and unique design allow a lowest interference for the performer. Low noise electronic circuitry together with balanced output allow noise isolation. The screw bolt clamp ensures mounting on drum rims,percussion instruments and cymbal stands in horizontal or vertical position securely.

*Excellent pick-up pattern conveys drum or percussion micking accurately and purely.
*Special shock-mount design for noise isolation.
*Adjustable arm for optional micking position.
*Screw-in clamp ensures stable mounting.
*Windscreen to prevent pop noise effectively.

■ Type: Electret Condenser
■ Frequency Response: 50 to 18,000Hz
■ Polar Pattern: Cardioid
■ Sensitivity (at 1,000Hz): -64dB*(0.63mV)*0dB=1V/μbar
■ Impedance: 220Ω
■ Max. SPL for 1% THD: 130 dB
■ Output Connector: 3P XLR(M)
■ Standard Accessories:Windscreen