Peavey Versarray 218 MK III Sub

Peavey Versarray 218 MK III  (Peavey Versarray 218MKIII)

The Crest Audio Versarray 218 Mk III Sub incorporates the ultra-high power Lo Max 18? woofer and a new cabinet design. The Versarray 218 Mk III is a direct radiator vented subwoofer designed specifically for the most demanding Pro-Audio applications.
The Versarray 218 Mk III Sub incorporates the UniVent venting system that literally pumps air through the enclosure, exchanging the stale hot air inside the cabinet for the cooler outside air. This helps keep the woofer operating temperatures from getting so high, and increases reliability and reduces power compression under heavy continuous drive conditions. The air pumping action is achieved without excessive turbulence or any significant net asymmetry of total vent air flow. The large vent area and long path length allow for a large volume of air to move with very low resistance.
Designed to be used in conjunction with a compatible DSP based loudspeaker signal processor, such as a Peavey Digitool, or MediaMatrix systems, with the Crest Audio factory settings in use, the Versarray 112 Mk III can perform to modern standards of excellence, and handily exceed the competitions audible performance.
An optional special Ground Stack Kit mounts to the Versarray 218 Mk III Sub, and allows up to three of the Crest Audio Versarray 112 Mk III's to be mounted on top of the Versarray 218 Mk III Sub, and angled upward, for use on stage in a stadium seating situation.

Features:
• Dual Lo Max 18″ subwoofers
• Power Handling: 2400 Watts continuous / 4800 Watts program
• Full power low frequency response down to 34 Hz
• UniVent vented cooling system
• Neutrik Speakon professional input connectors, 4- and 8-pin
• Built-in tilt back casters with 4″ wheels
• Pairs of heavy-duty steel handles inset on both sides
• 18 mm 13-ply Baltic Birch enclosure with steel inner brackets
• Hammerhead polyurea black finish and black powder-coated cloth lined grilles

Specificatioins:

Speaker Configuration
Subwoofer

Speaker Type
Non-Powered

Power RMS
2400 W

Power Program
4800 W

Power Peak
9600 W

Sensitivity (1W/1m)
98 dB

Maximum SPL
138 dB

Speaker Frequency Response
35 Hz – 125 Hz (-6 dB)

LF Driver
2 x 18" Lo Max® 18 Woofer, 4" Voice Coil

Input Connectors
2 x Neutrik® Speakon® NL4 & 1 x Neutrik Speakon NL8

Output Connectors
1 x Neutrik® Speakon® NL4

Suspension Points
Optional Ground Stack Kit avilable

Enclosure Material
Baltic Birch Plywood

Color
Black

Net Weight
183.0 lbs (83.20 kg)

Product Height
42.88" (1089 mm)

Product Width
25.56" (649 mm)

Product Depth
26.18" (665 mm)