PreSonus CDL10P | Hybrid Line Array and Point Source Speaker | 1000W Powered Loudspeaker with Rigging

PreSonus CDL10P  (PreSonus CDL-10P)

Powered Line Array Loudspeaker

PreSonus CDL10P is a powered line array loudspeaker designed for mobile sound reinforcement and permanent installation in venues that need strong output, controlled coverage, and flexible deployment. By combining line array behavior with point-source convenience, it delivers consistent SPL, focused directivity, and clear full-range performance for bands, DJs, clubs, event spaces, houses of worship, and speech applications.

PreSonus CDL10P Competitive Differences

• Hybrid constant-directivity design combines point-source simplicity with line-array-style pattern control for more consistent coverage
• Features a 10-inch woofer, six 2-inch high-mid drivers, onboard DSP modes, and integrated rigging for scalable portable or installed systems

PreSonus CDL10P Description

The PreSonus CDL10P is built for users who want the clarity and throw of a line array without the complexity and size of a traditional large-format system. Its hybrid design pairs a 10-inch low-frequency woofer with six 2-inch high-mid drivers to create coherent, controlled sound with a 120 by 15 degree coverage pattern. This makes it especially effective in rooms where even front-to-back coverage and vocal intelligibility are important.

With 1000W peak Class-D amplification and a low 420 Hz crossover point, the CDL10P is engineered for strong output and fast transient response while helping reduce comb filtering. The result is a loudspeaker that can deliver articulate speech, musical detail, and solid impact for a wide range of live performance and event applications. Its full-range design also makes it suitable for standalone use or as part of a larger system with compatible subwoofers.

Deployment flexibility is a major advantage of the PreSonus CDL10P. A dual-angle 35 mm pole socket supports use on a tripod or above a compatible subwoofer, while integrated pin-loaded rigging hardware allows flown arrays of up to six enclosures per side. Additional CDL10P cabinets can extend vertical coverage from 30 to 90 degrees, giving production teams and installers room to scale the system for different venues and audience sizes.

Onboard DSP helps simplify setup for common use cases. Available processing includes a 90 Hz high-pass filter, Array Mode for one to six boxes, and Sub Mode settings for compatible PreSonus subwoofers. Combined with balanced XLR input and output, powerCON connectivity, status LEDs, and a rugged polypropylene enclosure with steel grille, the CDL10P is ready for touring, installed audio, and portable event production.

CDL10P Features

• Hybrid line array and point-source powered loudspeaker
• 1 x 10-inch low-frequency woofer with 2.5-inch voice coil
• 6 x 2-inch high-mid drivers
• 1000W peak Class-D amplification
• 120 degree horizontal by 15 degree vertical coverage
• Low 420 Hz crossover point for improved intelligibility and reduced comb filtering
• Onboard DSP with 90 Hz high-pass filter
• Array Mode for configurations from 1 to 6 boxes
• Sub Mode for use with compatible PreSonus subwoofers
• Dual-angle 35 mm pole socket with 7.5 degree downward tilt
• Integrated pin-loaded rigging hardware
• Supports flown arrays of up to 6 enclosures per side
• Balanced XLR input and XLR output
• Signal, -3 dB, limiter protection, and clip-monitoring LEDs
• Rugged polypropylene enclosure with tour-grade steel grille
• Includes powerCON power cord

CDL10P Specifications

• Speaker Type: Active Line Array Loudspeaker
• Configuration: 2-Way
• Enclosure Type: Bass-Reflex
• Total Output Power: 250 W RMS / 500 W Program / 1000 W Peak
• Amplifier Class: Class-D
• LF Driver: 1 x 10 in (25.4 cm) woofer
• LF Voice Coil: 2.5 in (63.5 mm)
• HF Drivers: 6 x 2 in (50.8 mm)
• Coverage Angle: 120° H x 15° V
• Crossover Frequency: 420 Hz
• Dynamic Processing: Compression, HF Limiter, Limiter
• Protections: DC fault, overcurrent, overvoltage, thermal, undervoltage
• Audio Input: 1 x XLR 3-pin line input
• Audio Output: 1 x XLR 3-pin output
• AC Input Power: 90 to 260 VAC, 50 / 60 Hz
• AC Power I/O: 1 x powerCON input, 1 x powerCON output
• Mounting: 1 x 1.38 in (35 mm) dual-angle pole socket, integrated rigging
• Construction Material: Metal grille, polypropylene
• Color: Black
• Dimensions: 19.6 x 16.1 x 14.3 in (49.8 x 40.9 x 36.3 cm)
• Weight: 46.8 lb (21.2 kg)

What's In The Box

• PreSonus CDL10P powered loudspeaker
• powerCON power cord