sE Electronics X1A-2C RED/BLACK | Cardioid Condenser Mic - 150dB SPL | -20dB Pad & 100Hz Low-Cut

sE Electronics X1A-2CRB  (sE Electronics X1A2CRB)

Cardioid Condenser Microphone

The sE Electronics X1A-2C RED/BLACK is a versatile side-address cardioid condenser microphone designed for recording vocals, acoustic instruments, drums, guitar cabinets, piano, strings, brass, woodwinds, and room ambience. Its 2/3-inch back-electret condenser capsule delivers a natural 20 Hz-20 kHz frequency response, while a switchable -20 dB pad extends maximum SPL handling to 150 dB for close-miking loud sound sources.

sE Electronics X1A-2C RED/BLACK Competitive Differences

• 2/3-inch back-electret condenser capsule provides detailed, full-range recording
• Handles up to 150 dB SPL with the -20 dB attenuation pad engaged
• Switchable 100 Hz low-cut filter helps reduce rumble, footfall noise, and excessive proximity effect
• Low 16 dBA equivalent noise level supports clean recording of quieter sources
• Wide dynamic range of up to 134 dB with the attenuation pad engaged
• All-metal housing helps reject electrical interference while providing durable studio construction
• Integrated windscreen helps protect the capsule and reduce unwanted air movement
• Gold-plated XLR output provides a reliable balanced audio connection
• Distinctive red body and black grille provide a limited-edition appearance

sE Electronics X1A-2C RED/BLACK Description

The sE Electronics X1A-2C RED/BLACK combines a natural-sounding condenser capsule with practical onboard controls for home studios, project studios, musicians, producers, and recording engineers. Its cardioid polar pattern emphasizes sound arriving from the front while reducing pickup from the rear, making it suitable for isolated vocal and instrument recording.

The microphone delivers a frequency response of 20 Hz-20 kHz with a sensitivity of 20 mV/Pa and an equivalent noise level of 16 dBA. With the attenuation pad disengaged, it handles sound pressure levels up to 130 dB SPL. Engaging the -20 dB pad raises maximum SPL handling to 150 dB and extends the available dynamic range to 134 dB, making the microphone suitable for powerful sources such as drums, brass instruments, and amplified electric guitars.

A switchable 100 Hz low-cut filter with a 6 dB-per-octave slope helps control low-frequency rumble, footfall noise, and bass buildup caused by close-miking proximity effect. Together with the -20 dB pad, this gives the X1 A useful flexibility across both quieter acoustic recordings and high-output sources.

The all-metal body provides durable construction and helps shield the microphone from electrical interference. An integrated windscreen adds protection around the capsule, while the gold-plated 3-pin XLR connector provides a dependable signal connection. This red and black edition delivers the same versatile X1 A performance in a distinctive finish.

X1A-2C RED/BLACK Features

• 2/3-inch back-electret condenser capsule
• Cardioid polar pattern
• Side-address microphone design
• 20 Hz-20 kHz frequency response
• 130 dB maximum SPL without attenuation
• 150 dB maximum SPL with -20 dB pad engaged
• Switchable -20 dB attenuation pad
• Switchable 100 Hz low-cut filter
• 6 dB-per-octave low-cut filter slope
• 16 dBA equivalent noise level
• Up to 134 dB dynamic range
• All-metal microphone body
• Integrated windscreen
• Gold-plated 3-pin male XLR output
• 48V phantom powered
• Red finish with black grille
• Recommended for vocals, drum kits, overheads, room recording, acoustic guitar, electric guitar cabinets, piano, strings, orchestral instruments, woodwinds, and brass

X1A-2C RED/BLACK Specifications

• Capsule: 2/3 in Back-Electret Condenser
• Polar Pattern: Cardioid
• Orientation: Side Address
• Frequency Range: 20 Hz-20 kHz
• Sensitivity: 20 mV/Pa (-34 dBV)
• Maximum SPL: 130 dB at 1 kHz, 0.5% THD
• Maximum SPL with Pad: 150 dB at 1 kHz, 0.5% THD
• Equivalent Noise Level: 16 dBA
• Dynamic Range: 114 dB without Pad / 134 dB with Pad
• Signal-to-Noise Ratio: 78 dB
• Low-Cut Filter: 100 Hz, 6 dB/Octave, Switchable
• Attenuation Pad: -20 dB, Switchable
• Electrical Impedance: <50 Ohms
• Recommended Load Impedance: >1k Ohms
• Output Connector: 3-Pin Male XLR
• Power Requirement: 48V Phantom Power (P48 according to IEC 61938)
• Current Consumption: 4.0 mA
• Diameter: 2.28 in (58 mm)
• Length: 6.65 in (169 mm)
• Weight: 13.76 oz (390 g)
• Package Weight: 1.54 lb (0.70 kg)
• Box Dimensions: 11.1 x 5 x 3.9 in (281.9 x 127 x 99.1 mm)

What's In The Box

• sE Electronics X1 A Microphone
• Swivel Microphone Clip
• Microphone Stand Thread Adapter